निकेल मध्ये inconel 625 फास्टनर्स

625 inconel fasteners in nickel

In what form is nickel alloy Inconel 625 available at SOONV?

पत्रक
प्लेट
Bar/rods
Pipe & Tube (welded & seamless)
Wire/ring
screws/bolts
valves/seats

इंकनेल 625 ची वैशिष्ट्ये काय आहेत?

उच्च रांगणे-फुटणे शक्ती
ऑक्सिडेशन 1800 18 फॅ पर्यंत प्रतिरोधक
सी वॉटर पिटींग आणि क्रवीस गंज प्रतिरोधक
क्लोराईड आयन स्ट्रेस गंज क्रॅकिंग प्रतिरक्षा
चुंबकीय नसलेले

इनकॉनेल 625 कोणत्या अनुप्रयोगांमध्ये वापरला जातो?

एअरक्राफ्ट डक्टिंग सिस्टम
एरोस्पेस
जेट इंजिन एक्झॉस्ट सिस्टम
इंजिन थ्रस्ट-रिव्हर्सर सिस्टम
खास समुद्री जल उपकरणे
रासायनिक प्रक्रिया उपकरणे

Fabrication with Inconel 625

Alloy 625 has excellent forming and welding characteristics. It may be forged or hot worked providing temperature is maintained in the range of about 1800-2150° F. Ideally, to control grain size, finish hot working operations should be performed at the lower end of the temperature range. Because of its good ductility, alloy 625 is also readily formed by cold working. However, the alloy does work-harden rapidly so intermediate annealing treatments may be needed for complex component forming operations. In order to restore the best balance of properties, all hot or cold worked parts should be annealed and rapidly cooled. This nickel alloy can be welded by both manual and automatic welding methods, including gas tungsten arc, gas metal arc, electron beam and resistance welding. It exhibits good restraint welding characteristics.